Detcon 700 Series Remote Sensor/Alarm Relay Module With P Manuale Utente Scaricare il pdf (Pagina 6)

700 Profi-RAM

5.5" 3.675"

5.25"

Ø0.2650 X2

Mounting Holes

4.95"

Model 700Model 700

Three -

"NPT Fittings

Explosion Proof Enclosure

Junction-Box

Wall (or other

mounting surface)

3.675"

PGM2

SPAN

3/4" NPT

Explosion Proof Enclosure

Junction-Box

Sensor Assembly

Splash Guard

(Detcon's Junction-Box shown)

detcon inc.

H2S Sensor

detcon inc.

MODEL

TP-700

2.115"

PGM1

ZERO

PGM2

SPAN

5.5"

4.95"

5.25"

5.195"

2.125"

12.25"

Mounting

Bolt

Use Spacers to move

the J-Box and Sensor

Assembly away from the

wall at least 0.25-0.5" to

allow access to Sensor

Wall (or other

mounting surface)

7.63"

Ø0.2650 x2

Spacer

2.115"

2"2"

Mounting Holes

Model 700

Mounting

Bolt

Figure 2 Profi-RAM Mounting

Figure 3 Mounting Profi-RAM with 700 Sensor

The Profi-RAM Electronics package is accessed by removing the junction box cover, grabbing the brass pull

knobs, and pulling the package directly out of the enclosure. The module is mounted in the junction box via a

slip-fit over two long stand-offs attached to the bottom of the junction box. The two stand-offs protrude

through two clearance holes in the bottom two PCB’s. To install the electronics package, properly align the

stand-offs with the clearance holes and gently push the Profi-RAM in until the stand-offs make contact with

the top PCB. The Profi-RAM faceplate will be even with the top of the junction box when installed properly.

The Profi-RAM top should be about flush with the top of the enclosure before screwing down the junction box

cover.

Profibus RAM I.M. Rev. 0.3 Page 2 of 14

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Commenti su questo manuale

Nessun commento

Detcon 700 Series Remote Sensor/Alarm Relay Module With P Manuale Utente Pagina 6

Commenti su questo manuale

Prodotti e manuali riguardandi Hardware Detcon 700 Series Remote Sensor/Alarm Relay Module With P